Version 3.00
Leading-Edge Features
Special Features
Special Analysis Features
Ordinary Features
Additional Features

The lastest - WinLTP 3.00

Version 3.00 is a major upgrade from 2.32.

1) Increasing the number of  AD channels from 2 to 6.

2) Increasing the extracellular stimulation outputs from 2 to 8.

3) The extracelllular stimulation can be much more complex (see repetitive primed burst stimulation, AD5 and S5, in the figure below).

4) The interface has been enhanced to deal with the extra AD and stimulation  channels by placing the analysis graphs on a second monitor.

This figure records the simultaneous ouput of 6 of 8 extracellular stimulations (S0 to S5 below) in the
6 AD channels (above).  AD5 and S5 show 3 sequential trains of 2,3 and 4 pulses, and 3 primed burst stimulations.  Click the picture for an enlarged view.

Also: WinLTPimport

A program module by Dr. Clair Booth to import many WinLTP ASCII sweep files into MATLAB for reanalysis.

WinLTP is a stimulation, data acquisition and on-line analysis electrophysiology software program for studying Long-Term Potentiation (LTP) and similar synaptic phenomena, and uses patch-clamp and extracellular synaptic local field potential recording.  WinLTP is multitasking and simultaneously runs two tasks: 1) stimulus/acquisition sweeps, and 2) continuous acquisition saving Axon Binary Files. Central to the design of WinLTP is the Protocol Builder which can be used to generate complex induction stimulations.  WinLTP also has Automated Perfusion Control, which when coupled with the Protocol Builder, enables automated experiments to be run after a stable baseline has been achieved.

WinLTP is easy to use.  After installation, a single mouse click starts the baseline recording of an extracellular LTP experiment with averaging.  Another  single mouse click will evoke single train stimulation, theta burst stimulation, or Low Frequency Stimulation (for LTD induction).


Overview of WinLTP

WinLTP runs on Windows computers and uses National Instruments USB, PCI and PCIexpress M- and X-Series data acquisition boards.  Note that only WinLTP versions 2.30 and earlier support Axon Instruments' Digidata 1320A and 1322A boards.

Other software that can use National Instruments M- and X-Series boards includes ACQ4, AxoGraphX, Ephus, GePulse, jClamp, mPhys, NeuroMatic, NeuroRighter, QUB, StdpC, WaveSurfer, WinWCP/WinEDR, and programs written in MatLab, IGOR and  LabView.

WinLTP can be run in two different ways: the Standard version of the WinLTP Acquisition program with full functionality except for Automated Perfusion Control, and the Advanced Version with full functionality including Automated Perfusion Control.  The Standard and  Advanced Versions of WinLTP Acquisition require the purchase of a License Key.  The WinLTP Reanalysis program continues to be free.