LTP version 2 Preview
LTP version 2.2xx |
| 1. |
Record 2 AD channels (except for the Pico board which only has 1 AD channel) |
|||
| 2. |
Analyze all S0- and S1- evoked EPSP in a sweep (at least 1000 EPSPs/sweep) |
| a) | baselines and responses of all pulses | ||||||
| b) | baseline of the first pulse and responses of all pulses | ||||||
| c) | baseline and response of the first pulse only | ||||||
| d) | baseline of the first pulse and response of the last pulse |
| 3. | Automatic removal of stimulus artifacts for accurate determination of synaptic areas and peaks during a train | |||
| 4. | Sweeps can now be signal averaged and digitally filtered both on- and off-line |
|
LTP2.2xx is now in final debugging and early beta testing. |
|
Preview of 'LTP' version 2 (poster presented at the FENS meeting, June 2000, Brighton, UK) |
LTP version 2.3xx |
| 1. | Support a multi-channel AD board that you can buy. This will probably be the Quatech 801 ISA bus board although a PCI board may be supported in the future. I will probably not be supporting the new Axon Digidata 1320 board in this 32-bit DOS 'LTP' program |
|||
| 2. |
Automatically detect the 2ms dropout bug |
LTP version 3 |
| 1. | More accurate series resistance measurement |